Hedge Trimmer · Garden lithium

Detachable Blade Cordless Hedge Trimmer, Brushless 3815, 18–21V, 2,600spm, 16mm Cut

SKU HT-06 · Factory direct · OEM available

Brushless 3815,18–21V,2600spm,16mm Cutting Diameter,Up to 400W,Detachable Blade,±90° Handle,Dual Safety Switch.

▸Bolt-off detachable blade — pull the bolt and lift the old blade off; fit a new blade without replacing the whole tool.
▸Brushless 3815 motor, up to 400W — rated for hedge and shrub work on an 18–21V pack, with no brushes to wear out.
▸2,600 spm cutting frequency — dual-action stroke rate for twigs and soft new growth.
▸16mm maximum cutting diameter — for hedge faces and light branches, not woody limbs.
▸Rear handle rotates ±90° — turn the grip for vertical faces, flat tops, and side cuts.
▸Dual safety switch — both switches must be engaged before the blade runs, to reduce accidental starts.

Power: 400W
Voltage: 21V
Key spec: Cut Ø16 mm
Quote: 24h

--Overview-- This cordless hedge trimmer uses a brushless 3815 motor on an 18–21V battery. Cutting frequency is 2,600 strokes per minute, maximum cutting diameter is 16 mm, and maximum load power is 400W. The blade is a separate assembly. Remove the retaining bolt and the worn blade comes off; a new blade goes on the same body. The rear handle rotates ±90° so the grip can follow a vertical face or a flat top. Two switches must be held together before the blade starts. Use it for hedge faces, shrubs, and soft growth within 16 mm. It is not a chainsaw and will not cut thick wood. --Key features-- ▸Detachable blade: bolt out, blade off, new blade on ▸Brushless 3815 motor ▸Supply voltage 18–21V ▸Cutting frequency 2,600spm ▸Maximum cutting diameter 16 mm ▸Maximum load power 400W ▸Rear handle rotation ±90° ▸Dual safety switch

Request factory quote WhatsApp this model

Specifications

Voltage	18–21V
Motor	Brushless 3815
Max load power	400W
Cutting frequency	2,600spm
Max cutting diameter	16 mm
Blade	Detachable, bolt release
Rear handle	Rotates ±90°
Safety	Dual switch, both required to start

--How to use-- 1.Fit a compatible 18–21V battery. List capacity and whether battery and charger are included once confirmed. 2.To change the blade, remove the battery first, then pull the bolt and lift the blade assembly off. Fit the new blade and tighten the bolt before the battery goes back on. 3.Set the rear handle angle for the face you are cutting. Lock it before you start. 4.Hold both safety switches to run the blade. Releasing either switch stops the cut. 5.Work within the 16 mm limit. Do not force woody stems thicker than that into the teeth. 6.After use, remove the battery, clear clippings from the teeth, and check the bolt is still tight.

OEM note

Housing colour, carton language, voltage and plug are locked in the PO. Send destination port and monthly volume.

Quote this machine.

Tell us quantity, 110 or 220V, plug type and destination port. We reply within one working day.

Detachable Blade Cordless Hedge Trimmer, Brushless 3815, 18–21V, 2,600spm, 16mm Cut

Specifications

Quote this machine.

Also in this family

42V Foldable Cordless Mini Tiller Cultivator, 900W Max Output, 32cm Tilling Width, 10cm Tilling Depth

Cordless Handheld Mini Tiller Cultivator, 200W Motor, 125mm Tilling Width, 35mm Tilling Depth

Brushless 3815 Hedge Trimmer with Battery Display, 455mm Effective Cut, 400W, 2,600spm, 16mm, 2kg

21V Brushless 3820 High-Speed Leaf Blower, 550W, 50m/s, 1,000g Wind Pressure, 580g